Request a Quote

Hand Markers & Accessories

Portable marking tools and accessories for on-site applications

One of the most important things to remember in electrochemical marking is to use the proper marking tool for the job. Our hand markers and accessories provide portable, flexible solutions for on-site and hard-to-reach applications.

Marker Cartridges

Highly conductive carbon head can be milled to any special size. Includes clear plastic body that holds electrolyte.

Available Models:

  • • 4650 Rectangular Marker (1/2" x 1 1/2")

Hand Markers

Plastic body marker used in conjunction with hand marker screens. Good for hard to reach places.

Available Sizes:

  • • 4392 - 1" x 2"
  • • 4395 - 1/4" x 3/4"
  • • 4396 - 1/4" x 1 1/2"
  • • 4397 - 1/2" x 1 1/2"

Deep Etch Pads

Heavy duty extra absorbent pads used mainly for deep etching. Used with carbon marking cartridge.

10 pads per pack

Custom sizes available, please call.

Polar Pads

Rectangular marking polar pads for use with carbon markers.

Available Models:

  • • 4650-1 - To fit 4650 Marker Cartridge
  • • 3121-3 - Polar pad with side flaps

Custom sizes available, please call.

Hand Marker Screens

Perforated screen wrapped with electrolyte absorbing paper. To be used with hand markers.

Available Sizes:

  • • 4392-1 - 1" x 2"
  • • 4395-1 - 1/4" x 3/4"
  • • 4396-1 - 1/4" x 1 1/2"
  • • 4397-1 - 1/2" x 1 1/2"
  • • 4397-2 – Cloth Sewn

Cord Sets

Black and red cord leads that connect the power unit to the marker and the ground plate.

4309-BA Standard Cord Set

Standard for IMG and other male-ended markers

4359 Universal Cord Set

Includes adaptor for male- or female-ended markers

4' standard length. Longer cords available by request.

Saddle Marker

Marks round parts from a diameter of 1/2" to 3". Width of marker: 1". Screen to fit is included.

Includes 16062-1 Saddle Marker Screen

Custom sizes available, please call.

Electrolyte Dispensing Vessel

This unit is primarily used with our automatic marking system. Eliminates hand dipping marker cartridge and provides constant flow of electrolyte to the marker.

Wiping Tissue

Saturated with neutralyte, use to wipe parts after marking and neutralizing. Helps prevent rust. Work is then ready for oiling.

P/N: 2500

Neutralyte Well Assembly

Marked parts are neutralized by wiping over top of block. Well must be filled with neutralyte.

Available in multiple sizes

Contour Block Well Assembly

Solid graphite block in an electrolyte well. Block can be contoured to almost any round part.

Includes 3200-1 Polar pad and wick

4359 Cord set required (2 male ends)

Rocker Marker Assembly

For use with the grid marking assembly. Aids in the marking of large areas. Screen and wick included.

Includes 15018-1&2 Rocker Screen and Wick

Roller Marker

Graphite roller marker ideal for larger area marks up to and including grid marking. Use the roller marker as you would a paint roller.

Available Sizes:

  • • 1 1/2" width
  • • 3" width
  • • 6" width

Pad to fit included

Important Cleaning Note

All cases of rusting or corrosion after marking can be traced back to poor cleaning techniques. Be sure cleaning applicator does not become contaminated with electrolyte.