Bench Marker and Accessories

The Bench Marker Etches Round Pieces by Rolling Them Across the Stencil

The bench marker plugs directly into the power unit. The stencil is placed on the pad that fits into an electrolyte reservoir. The electrolyte is drawn into the pad thru wicking action.

Learn more on our bench marker here…

Locating Plate

Clear plastic fixture which can be cut to precisely locate part on stencil.
4400-LOCATING PLATE

Bench Marking Fixture

Marks round parts by rolling parts over stencil located on the fixture. Also used for precise placement of mark on small parts by utilizing locating plate #4400. For marks up to 2" x 4 1/2". Can be used with any power unit.
3001-BA-BENCH MARKING FIXTURE

Polarite Paper

Used with the bench marker to fit over wick for more conductivity.
4325-For use with 4310 wick
4326-For use with 4311 wick
Graphite Block Top Plate: Highly conductive top plate for the bench marker. Can be used as a replacement for the 4300-1 perforated plate.
4327-Graphite block top plate

Perforated Plate

Fits into well of bench marker and supports wick.
4300-1-Perforated Plate
4301-1-Perforated Plate with a 1" extension to mark parts with a collar or a flange.

Absorbent Wick

Absorbent pad that fits over perforated plate and fits into bench marking fixture.
4310-Use with 4310 perforated plate
4311-Use with 4301-1 perforated plate

Wire Mesh and Cloth

Use with absorbent wick for longer life. May be used in place of polarite paper.
4320-Wire mesh and cloth-Use with 4310 wick
4321-Wire mesh and cloth-Use with 4301-1 extension plate

Hand Ground Plate

Connects to bench marker and grounds part while rolling over stencil.
4330-BA-Hand ground plate